Universal KeyPad & Remote With Receiver. Pair Remotes To Any Garage Or Gate Motor In NZ

Universal Wireless Garage Door & Gate Keypad Kit

The Easy Way To Add A Keypad To Almost Any Garage Door Or Gate

Stop wasting time trying to find compatible remotes.

This complete kit includes a wireless keypad, universal receiver and remote control, allowing you to add secure PIN access to any garage door or automatic gate system.

The receiver wires directly into your existing garage door or gate motor control board. It connects to the exact same terminals used by a wall button, push button or trigger switch. EASY We are a pro garage door company and we use this product it is great and genuinely works well.

If your motor has terminals for a wall button,this kit will work.

No complicated setup.

No expensive replacement controller.

No electrician required.

Couldn’t be easier.

How It Works

1. Mount the keypad.
2. Wire the receiver into your motor control board.
3. Pair the included remote and keypad to the receiver.
4. Enter your PIN and enjoy keyless access.

That’s it.

The receiver acts as a universal bridge between your motor and the keypad/remotes.

Instead of trying to find remotes that match your motor’s coding system, you simply use the included receiver and pair everything directly to it.

Why Customers Buy This Kit

✔ Lost all their remotes

✔ Original remotes are discontinued

✔ Existing remotes are expensive

✔ Want keypad access

✔ Want extra remotes

✔ Adding access control to gates

✔ Need a simple universal solution

Suitable For

• Sectional garage doors
• Roller garage doors
• Commercial roller doors
• Sliding gates
• Swing gates
• Automatic driveway gates
• Workshop doors
• Lifestyle block entrances

Features

✔ Universal receiver included

✔ Wireless keypad included

✔ Remote control included

✔ Dual channel operation

✔ Secure rolling code technology

✔ Weather-resistant keypad

✔ Long battery life

✔ Easy DIY installation

✔ Works with 12V–24V DC systems

✔ Up to 200m transmission range in open areas

✔ Suitable for the vast majority of garage door and gate motors

Compatible With Many Popular Brands

Commonly installed on systems from:

• Force
• Force Premium
• Turtle Gates
• Steel-Line
• BFT
• Nice
• Beninca
• FAAC
• DEA
• ET Systems
• Centurion
• Proteco
• Key Automation
• Centsys
• DACE
• Various Chinese gate motors
• Various Chinese garage door motors
• Many older garage door systems with unavailable remotes

Technical Specifications

• Frequency: 433.92MHz
• Receiver Power: 12V–24V DC
• Receiver Channels: 2
• Waterproof Rating: IP54
• Keypad Battery: 2 x CR2032
• Range: Up to 200m open area
• Indoor Range: Approx. 35m
• Operating Temperature: -20°C to +55°C

What’s Included

✔ Wireless Keypad

✔ Universal Receiver

✔ Remote Control

✔ Mounting Hardware

✔ Programming Instructions

IMPORTANT – PLEASE READ

This kit works by wiring the included receiver into your existing garage door or gate motor.

In most cases, the receiver connects to the same terminals used for:

• Wall buttons
• Push buttons
• Exit buttons
• Intercom systems
• Access control systems

If your motor has a wall button input, this kit will typically work.

Suitable for approximately 95–99% of garage door and gate motors when installed using the included receiver.

If you’re unsure, simply send us a photo of your motor, control board or existing remote and we’ll help confirm compatibility before purchase.

Non-Refundable Electronic Product

Due to the nature of this product, compatibility must be checked before ordering. Once installed, wired, programmed or used, this item cannot be returned for compatibility reasons. Please contact us first if you’re unsure.